Concrete Mixer Safety Operation Rules
Submitted by Cynthia,02/17/2013Here Pioneer Machinery Company tells you how to operate concrete mixer:
Users should guarantee that meter and indicating signal is accurate and reliable. The concrete mixer console should be padded of rubber plate or dry wood. Transmission mechanism and working devices, such as brakes should be reliable and tight to guarantee the normal work.
Run concrete mixer without loading and check the rotating direction of the mixing drum and blades. Guarantee the operation and braking of each working device to confirm the normal operation, then users can start working. When hopper rises, strictly prohibit working or trajection under the concrete mixer. Pad pillow in the material pit bottom, and must fasten hopper chains when cleaning material pit.
When feeding, no head or hand reachs into the gap between hopper and the rack. During operation, shall not put into the stirring barrel and discharge the material by hand or tool. Aggregate specifications should be consistent with the concrete mixer, and aggregate beyond the scope of license shall not be used.
During concrete mixer operations, if failure happens and can not continue running, users should be immediately cut off the power and clean the concrete inside the mixing drum.
Feed materials to the concrete mixer should be in operation. When adding new materials, users must discharge original concrete.Users shall not stop concrete mixer halfway or start mixer when the mixer was full loaded.
After the operation, users will timely discharge the water storage in water tank and pipeline, and clean and maintain concrete mixer and clean up the work site. If the operator has to enter the cylinder to clean concrete mixer, the power must be cut off. After the operation, users should descend hopper to the hopper pit. If users need to rise the hopper, they should apply the chain to fasten.
Hope these concrete mixer safety operation rules are helpful to you!